What's Wi-Fi Optimization?
Wi-Fi Optimization is an intelligent and automatic RF optimization scheme tailored for complicated scenarios with multiple APs. It is supported on most Reyee APs, and EGs. After Wi-Fi Optimization collects spatial information, including SSID, channel, signal strength and client status (transfer rate, delay, packet loss rate etc.), it analyses information through the intelligent algorithm to provide the optimal network solution (channel and power planning for each AP), and automatically adjusts the configuration of APs in the network.
Why is Wi-Fi Optimization needed? What's its benefits?
Imagine that you need to optimize over 100 APs. However, the roaming effect of auto channel optimization is not satisfactory, and it takes too much time to manually adjust the channel and power. Or imagine an office with dozens of APs whose network connection is unstable for some PCs or phones. Clients may experience web buffering and low speed. Wireless network optimization used to be time and labor consuming. But now, with Wi-Fi Optimization, you can complete the optimization of all APs by one click.
Which products support Wi-Fi Optimization?
Gateway: EG105G, EG105G-P, EG105GW, EG210G-P, EG210G-E, EG105G-V2
RAP: RAP2200(E), RAP2200(F), RAP1200(P), RAP1200(F), RAP2260(G)
1. Wi-Fi Optimization is not supported if there are only RAP2200(F), RAP1200(F), but no EG in the network. That is, if a project has only 100M APs but no EG,Wi-Fi Optimization is not supported.
2. If there is no EG in the network, Wi-Fi Optimization can be enabled on less than 50 APs. That is, 50 1000M APs can run Wi-Fi Optimization even without EG.
3. Wi-Fi Optimization is supported if there is EG in the network.
4. Wi-Fi Optimization is going to be supported on EG-E series gateways.