Ruijie Cloud V3.5.0 Updated on Dec 29, 2021

Updated on 2022-06-28

New Features

1. To improve the network security, a management password is required for each project, and the password should be entered when you add a device to the project.

When you add a project, a management password is required and used as the login password for the eWeb systems of devices in the project.


When you add a device, its login password for eWeb system and the management password of the project should be consistent, to ensure the network security.


2. Improve network sharing: support configuring validity period after acceptance and project permission, and searching the shared project.

Support configuring validity period after acceptance and read & write permission, and canceling the network sharing.



Support checking and searching the tenants and accepted projects (by Email or project name).


3. On Ruijie RGOS EG, you can customize the destination port to access internal network when creating a tunnel.


4. On Reyee EG, you can enable IGMP function (only on the EG with P56 or a higher version).


Improved authentication:  Support to detect user offline for portal authentication when user account duration runs out.


5. Ruijie Cloud provides Reyee EG with a custom domain name that automatically maps to the public IP address of the device (if the WAN IP address is not a public IP address, the domain may not be accessible) -- Beta.          


6. Improve the logo configuration of report. You can configure different logos according to tenant or group. 


7. Improve the management of un-managed switch. Support configuring its downlink port and device type.


8. Other improvement: 

  • The device list can be ordered by alias:


  •  The client list can save the customized column display.  

  • Cancel the Old UI of group management.








In bridge   mode, VLAN 233 is not available.

In bridge   mode, the VLAN ID of SSID could not be ‘VLAN233’ if there is an SSID working   in NAT mode on the same AP. Reason: VLAN233 will be used as the internal VLAN   if one or more SSID work in NAT mode.



In the   management mode, AP with multiple uplink LAN ports only takes the port LAN 1   as uplink port.

For devices   with dual power supply ports, like AP740-I, AP840-I, only going online   through LAN1 is supported by MACC.


History Record

It will take a   while for searching the history.

When the data   of historical users, connection logs and etc. reach to a million count, the   corresponding search operation will take a long time (around 10 seconds).Both   big data and server performance cause the problem.



Client log   export failure.

Client data   export will fail if the number of records is more than 100,000.



PPSK can be   configured in the root network only.

Only the Sub   account user who is assigned with the root network is able to configure PPSK.


Captive portal

Captive portal   seamless is globally configured on APs.

If one   portal's SSID enables seamless, all portals' SSIDs will be enabled at the   same time, vice-versa for the disable function.



The NAT   address pool mode is changed. An address pool is required.

When you   create or edit an SSID and set Forward Mode to NAT, the NAT address pool is   changed. An address pool is required.


Sub account

It is   recommended to select a layer-1 network to create a sub account.

Only the sub   account of layer-1 network can view statistics in Analysis.


Facebook Like

An error   occurs if the iPhone user taps Like during authentication.

If the user   authenticates to SSID through the popup page which contains Facebook Like   function, when he taps the Like button, an error will occur. In order to   normally use Facebook Like function, it is recommended to access the Internet   through a browser after connecting to SSID, and then open the portal page.


Change the   time zone of network

After the time   zone is changed, the data of existing reports are not consistent with the new   time zone.

After the time   zone is changed, the data of existing reports will not be recounted, so the   statistics are not consistent with the new time zone. The data of   newly-generated reports are correct.



Voucher   limitation of each network.

Up to 20,000   vouchers can be added to each network (including sub network), and up to   1,000 vouchers can be exported.



Tunnel   limitation on EG

In the same   tenant, up to 10 tunnels can be created.

On the same   device, up to 5 tunnels can be created.

The expiry   time for the tunnel is 3 hours.



Limitation on   historical clients displaying.

Up to 1000   historical clients are displayed.


AC Management

VAC limitation

Not support the VAC   scenario


AC Management

AC RRM   limitation

Only when the country   code is CN(China) or US(United States), RRM is supported.


AC Management

AC   configuration limitation

Only APs in the default   group of AC can be configured on Cloud.


Reyee AP

Not support   PPSK, Portal auth and RRM

PPSK, Portal Auth and   Cloud RRM are not supported on Reyee APs.


Portal SMS

SMS login

Not support phone number   reporting and online policy control.


Hand over Project  

Hand over a project   to another account

The project to be handed over should have less than 100 sub projects.

20 Reyee AP Network Group Level Recomend not to add subgroup for Reyee APs, if required, only one level of subgroup can be used. 

©2014-2021 Ruijie Networks Co.Ltd