Ruijie Cloud V4.4.0 Release Note Updated on March 30, 2023

Updated on 2023-04-23

During the upgrade, there is no impact to Cloud service, all devices are still active.

New Features

(These features are available on the new UI. If you want to try the new design, click the link to apply.)

1. The Storm Control feature can be configured on the switch product.

Users can perform storm control separately for the broadcast, multicast, and unknown unicast data flows. When the rate of broadcast, multicast, or unknown unicast data flows received over a device port exceeds the specified range, the device transmits only packets in the specified range and discards packets beyond the range until the packet rate falls within the range. This prevents flooded data from entering the LAN and causing a storm.

Project > Workspace Switch > Configuration > Storm Control

1280X1280 (2).PNG

2. The Port Aggregation feature can be configured on the switch product.

An aggregate port (AP) is a logical link formed by binding multiple physical links. It is used to expand link bandwidth, thereby improving connection reliability.

The AP function supports load balancing and therefore, evenly distributes traffic to member links. The AP implements link backup. When a member link of an AP is disconnected, the system automatically distributes traffic of this link to other available member links. Broadcast or multicast packets received by one member link of an AP are not forwarded to other member links.

Project > Workspace > Switch > Configuration > Port Aggregation


3. The AI Diagnostics function is supported.

Diagnose Failures and Identify Root Causes With Just One Click, Making Troubleshooting More Manageable and Efficient.

Project > Workspace>AI Diagnostics


4. The Session Limits feature can be configured on the NBR product.

Configure the number of connections in a session per IP address.

Project > Workspace > NBR >Configuration>Session Limits


5. The IP-Port Rate Limit feature can be configured on the NBR product.

  The IP-Port Rate Limit module allows you to configure traffic limits for ports, including rate limits for inbound and outbound direction of ports.

output (2).png

6. The Port Protection feature can be configured on the Switch product.

In some scenarios, it is required that communication be disabled between some ports on the device. For this purpose, you can configure some ports as protected ports. Ports that enable port protection (protected ports) cannot communicate with each other, users on different ports are L2-isolated. The protected ports can communicate with non-protected ports.


7. Optimized ACL feature

8. Added support for the Ukrainian language in Project Report feature








In bridge   mode, VLAN 233 is not available.

In bridge   mode, the VLAN ID of SSID could not be ‘VLAN233’ if there is an SSID working   in NAT mode on the same AP. Reason: VLAN233 will be used as the internal VLAN   if one or more SSID work in NAT mode.



In the   management mode, AP with multiple uplink LAN ports only takes the port LAN 1   as uplink port.

For devices   with dual power supply ports, like AP740-I, AP840-I, only going online   through LAN1 is supported by MACC.


History Record

It will take a   while for searching the history.

When the data   of historical users, connection logs and etc. reach to a million count, the   corresponding search operation will take a long time (around 10 seconds).Both   big data and server performance cause the problem.



Client log   export failure.

Client data   export will fail if the number of records is more than 100,000.



PPSK can be   configured in the root network only.

Only the Sub   account user who is assigned with the root network is able to configure PPSK.


Captive portal

Captive portal   seamless is globally configured on APs.

If one   portal's SSID enables seamless, all portals' SSIDs will be enabled at the   same time, vice-versa for the disable function.



The NAT   address pool mode is changed. An address pool is required.

When you   create or edit an SSID and set Forward Mode to NAT, the NAT address pool is   changed. An address pool is required.


Sub account

It is   recommended to select a layer-1 network to create a sub account.

Only the sub   account of layer-1 network can view statistics in Analysis.


Facebook Like

An error   occurs if the iPhone user taps Like during authentication.

If the user   authenticates to SSID through the popup page which contains Facebook Like   function, when he taps the Like button, an error will occur. In order to   normally use Facebook Like function, it is recommended to access the Internet   through a browser after connecting to SSID, and then open the portal page.


Change the   time zone of network

After the time   zone is changed, the data of existing reports are not consistent with the new   time zone.

After the time   zone is changed, the data of existing reports will not be recounted, so the   statistics are not consistent with the new time zone. The data of   newly-generated reports are correct.



Voucher   limitation of each network.

Up to 20,000   vouchers can be added to each network (including sub network), and up to   1,000 vouchers can be exported.



Tunnel   limitation on EG

In the same   tenant, up to 10 tunnels can be created.

On the same   device, up to 5 tunnels can be created.

The expiry   time for the tunnel is 3 hours.



Limitation on   historical clients displaying.

Up to 1000   historical clients are displayed.


AC Management

VAC limitation

Not support the VAC   scenario


AC Management

AC RRM   limitation

Only when the country   code is CN(China) or US(United States), RRM is supported.


AC Management

AC   configuration limitation

Only APs in the default   group of AC can be configured on Cloud.


Reyee AP

Not support   PPSK, Portal auth and RRM

PPSK, Portal Auth and   Cloud RRM are not supported on Reyee APs.


Portal SMS

SMS login

Not support phone number   reporting and online policy control.


Hand over Project  

Hand over a project   to another account

The project to be handed over should have less than 100 sub projects.

20 Reyee AP Network Group Level Recomend not to add subgroup for Reyee APs, if required, only one level of subgroup can be used. 

©2014-2021 Ruijie Networks Co.Ltd